Cybex 751T Treadmill User Manual
Page 23
Cybex 751T Treadmill Owner’s Manual
23
CAUTION: Serious injury or damage to machine can occur. To avoid injury or damage the
following procedure must be followed. A minimum of two people are required
to lift, move and assemble this treadmill. Always use proper lifting methods
when moving heavy items.
Lift and move the treadmill.
At least two people should lift and move the treadmill to a level location where you intend to leave it.
Use proper lifting methods.
Verify the model and voltage.
Verify that you have the correct model and voltage by looking at the serial number label located at the
rear of the unit.
Install the uprights.
1.
Locate the left upright (#3) and five bolts, 3/8-16 x .625” (#20).
2.
Carefully place the left upright (#3) on the base assembly (#1) as shown. See Figure 3.
Figure 3
#3
#1
#20
#20
#20
3.
Using a 9/16” Socket wrench, partially tighten each of the five bolts, 3/8-16 x .625” (#20). See
Figure 3.
4. Repeat steps 6A to 6C for the right upright (#4).