Cybex 751T Treadmill - Manual (Page 35)

Cybex 751T Treadmill Owner’s Manual Cybex 751T Treadmill Owner’s Manual
35
Detailed Operation Guide
Maximum user weight is 400 lbs. (181 kg).
1. Plug the treadmill power cord into a power outlet from a grounded, single phase, dedicated
circuit, rated for one of the following:
100 VAC, 50/60 Hz, 20A
115 VAC, 60 Hz, 20A
220 VAC, 60 Hz, 15A
230 VAC, 50 Hz, 15A
230 VAC, 50 Hz, 13A, UK.
2. Set the on/off switch to the on position.
WARNING: Serious injury or death can occur. To avoid injury or death the following
procedure must be followed. Do not stand on the running belt when starting
the treadmill. Always place your feet on the two top steps when beginning a
workout.
3. Place your feet on the two top steps located on each side of the running belt.
4. Clip the e-stop clip onto your clothing and carefully test the e-stop key to ensure it will activate
in case of an emergency. See Emergency Stop Key (e-stop) in Chapter 1 for properly testing
the e-stop key. Also, see Stopping the Treadmill in this chapter for further information about the
e-stop key. Be sure the string is free of knots and has enough slack for you to run comfortably
with the e-stop key in place.
5.
You now have the option to select a program, a fitness test or enter Manual Mode.