Daktronics All Sport 2000 Series - Manual (Page 7)

Introduction
Introduction
This manual is designed to explain the operation of the All Sport
®
2000 series control console.
For questions regarding the safety, installation, operation, or service of this system, please refer
to the telephone numbers listed on the cover page of this manual.
Important Safeguards:
1. Read and understand these instructions before installing.
2. Do not drop the control console or allow it to get wet.
3. Do not let any power cord touch hot surfaces or hang over the edge of a table which
would damage or cut the cord.
4. Always unplug the control equipment when it is not in use. Never yank the power cord
to pull the plug from the outlet. Grasp the plug and pull to disconnect.
5. To avoid electrical shock, do not disassemble the control equipment or the driver
modules. Incorrect reassembly can cause electric shock and faulty operation or
permanent damage to the circuits.
There are several console models in the All Sport 2000 series that differ by voltage and/or
outputs. The following table lists the models and their differences.
Model Part No. Power # Outputs Programming
2000 0A-1065-0015 12 V 1 Standard
2010 0A-1065-0129 120 VAC 1 Standard
2100 0A-1065-0092 12 V 1 Standard
2110 0A-1065-0131 120 VAC 1 Standard
2200 0A-1065-0019 12 V 4 Standard
2210 0A-1065-0130 120 VAC 4 Standard
2300 0A-1065-0094 12 V 4 Standard
2310 0A-1065-0132 120 VAC 4 Standard
2400 0A-1065-0036 12 V 4 Custom
2410 0A-1065-0124 120 VAC 4 Custom
2420 0A-1065-0147 230 VAC 4 Custom
2500 0A-1065-0115 12 V 1 Standard
2510 0A-1065-0122 120 VAC 1 Standard
2520 0A-1065-0148 230 VAC 1 Standard
2600 0A-1065-0117 12 V 4 Standard
2610 0A-1065-0120 120 VAC 4 Standard
2620 0A-1065-0149 230 VAC 4 Standard