DFI CM100-C - Manual (Page 51)

www.dfi .com
51
Chapter 4 Supported Software
Chapter 4
F6 Floppy
This is used to create a floppy driver diskette needed when you install Windows® XP using
the F6 installation method. This will allow you to install the operating system onto a hard drive
when in AHCI mode.
1. Insert a blank floppy diskette.
2. Locate for the drivers in the CD then copy them to the floppy diskette. The CD includes
drivers for both 32-bit and 64-bit operating systems. The path to the drivers are shown
below.
32-bit
CD Drive:\AHCI_RAID\F6FLOPPY\f6flpy32
64-bit
CD Drive:\AHCI_RAID\F6FLOPPY\f6flpy64
TPM Driver and Tools (optional)
To install the driver, click “Infineon TPM driver and tool (option)” on the main menu.
1. Read the message and click OK.
2. The setup program is preparing
to install the driver.
3. Click “I accept the terms in the
license agreement” and then
click “Next”.