DFI CR101-D - Manual (Page 16)

www.dfi .com
16
Chapter 2 Hardware Installation
Chapter 2
Power-on Select
To power-on via WOL after G3:
1. Set JP12 pins 2 and 3 to On.
2. Set the “After G3” field to Power Off/WOL.
3. Set the “GbE Wake Up From S5” to Enabled.
The BIOS fields are in the “South Bridge Configuration” submenu (Chipset menu) of the AMI
BIOS utility.
To power-on via AC Power:
1. Set JP12 pins 2 and 3 to On.
2. Set the “After G3” field to Power On.
1-2 On:
Power-on via power button
(default)
2-3 On:
Power-on via AC power; or
Power-on via WOL after G3
JP12
3
1
2
3
1
2
JP 11
Backlight Level Select
JP 11 is used to select the backlight level +5V or +3.3V.
3
1
2
3
1
2
2-3 On: +3.3V
1-2 On: +5V
(default)