Grease fittings, Rease, Ittings – DR Power Walk-behind 13 - 17 HP (May 2001 - February 2003) User Manual
Page 16
10
DR
®
ALL-TERRAIN
™
FIELD and BRUSH MOWER Safety & Operating Instructions
Grease Fittings
1. There are two grease fittings below the
black belt guard that need maintenance
(Figure 6):
· The belt idler arm should have 1-2
pumps of grease every 25 operating
hours.
· The mower spindle should have 3-4
pumps every 100 operating hours.
Note: Over greasing will cause grease
to leak out of the seals onto the mower
drive belt. Unless instructed
otherwise, pump only until you feel
slight resistance (1-2 pumps).
2. The drive chain should be lubricated with
FLUID FILM
®
or comparable lubricant
every 10 to 20 operating hours—more
often if the machine is operated in
extremely dusty or wet conditions.
Remove the chain cover, lubricate the
chain and replace the cover (Figures 7 &
8).
Figure 6
Figure 7
Figure 8