To remove the wheels, To adjust the parking brake, Transmission – DR Power Walk-behind 13 - 17 HP (May 2001 - February 2003) User Manual
Page 21: Emove the, Heels, Djust the, Arking, Rake, Ransmission
Advertising
DR
®
ALL-TERRAIN
™
FIELD and BRUSH MOWER Safety & Operating Instructions
15
To Remove the Wheels
Tools Needed:
· 3/4" socket with extension
!
WARNING: Always disconnect the
spark plug wire before servicing your
machine.
1. Block the machine so the wheel to be
removed is off the ground.
2. Remove the three nuts and slide the wheel
off.
To Adjust the Parking Brake
Tool Needed:
· 1/2" open end wrench
!
WARNING: Always disconnect the
spark plug wire before servicing your
machine.
To adjust the parking brake, tighten or loosen
the nut shown in Figure 21. This will
increase or decrease pressure on the brake
pad.
Transmission
The transmission is maintenance-free and does not need additional lubrication.
Figure 20
Figure 21
Advertising