DR Power Walk-behind 13 - 17 HP (May 2001 - February 2003) - Manual (Page 18)

12
DR
®
ALL-TERRAIN
™
FIELD and BRUSH MOWER Safety & Operating Instructions
4. Tilt the power unit back on the handlebars.
5. Remove the nuts on the clutch bracket and the clutch drive spring (Figure 12).
6. Remove the spring (Figure 13).
7. Lift and swing the clutch bracket out
of the way (Figure 13).
8. Remove the three belt guides
(Figure 13).
9. Loosen the belt retainer bolts on the
outside of the frame (one on each side)
and slide the retainer back (Figure
14).
10. Remove the belt.
To mount the new belt, reverse the above
procedure.
Figure 12
Figure 13
Figure 14