To remove or change the deck, Emove or, Hange the – DR Power Walk-behind 13 - 17 HP (May 2001 - February 2003) User Manual
Page 22
Advertising
16
DR
®
ALL-TERRAIN
™
FIELD and BRUSH MOWER Safety & Operating Instructions
To Remove or Change the Deck
!
WARNING: Always disconnect the
spark plug wire before servicing your
machine.
1. Remove the black belt guard by
unscrewing the black knob, lifting the
cover and pulling up and back to
remove it.
2. Release the belt tension lever
(Figure 22).
3. Remove the belt from the pulley
(Figure 23).
4. Remove the pin and collar (Figure 24),
then pull the power unit away from the
deck.
Figure 22
Figure 23
Figure 24
Advertising