DR Power RapidFire 5.5 HP Subaru (July 2013 - Present) Operating Manual - Manual (Page 9)

CONTACT US AT www.DRpower.com 9
Specifications
RapidFire Pro RapidFire Pro-XL (manual start) RapidFire Pro-XL (elec. start)
Engine DR 5.5hp (see engine manual
for specifications) Subaru 6hp (see engine manual
for specifications) Subaru 6hp (see engine
manual for specifications)
Wedge Height 6-1/4" 6-1/4" 6-1/4"
Log Capacity Length 24 inches, Diameter
30 inches* Length 24 inches, Diameter 30
inches* Length 24 inches, Diameter
30 inches*
Cycle Time 3 seconds (approx.) 3 seconds (approx.) 3 seconds (approx.)
Tires 16" 16" 16"
Beam Height 26" 26" 26"
Overall Height 48.3" 48.3" 48.3"
Overall Length w/ Tray 100.9" 100.9" 100.9"
Overall Length w/out Tray 83.5" 83.5" 83.5"
Width 46.8" 46.8" 46.8"
Splitter Weight w/ Tray 395 lbs. (179kg) 435 lbs. (197kg) 440 lbs. (200kg)
Splitter Weight w/out Tray 363 lbs. (165kg) 403 lbs. (183kg) 408 lbs. (185kg)
Flywheel Weight 55 lbs. (34kg) 74 lbs. (34kg) 74 lbs. (25kg)
Flywheel Diameter 18-1/4" 18-1/4" 18-1/4"
Flywheel Max RPM 400 RPM 400 RPM 400 RPM
*The diameter listed is indicative of the maximum suggested size - a small log can be difficult to split when it contains knots or a
particularly tough fiber. On the other hand, it may not be difficult to split logs with regular fibers even if its diameter exceeds the
maximum indicated above.
Assembling the DR RAPIDFIRE LOG SPLITTER
Tools and Supplies needed:

Utility Knife
 Wire Cutters

Gloves

Two 9/16" Wrenches
Installing The Cradle Kit
Parts Supplied in Cradle Kit ( Figure 2):
Item # Part # Description Qty
1 ............. 321041 ............ Bolt, Carriage, 3/8-16 X 1", GR5, ZP ..... 6
2 ............. 313601 ............ Cradle, Standard .................................... 2
3 ............. 313581 ............ Mount, Cradle ....................................... 1
4 ............. 333511 ............ Bolt, Hex, Flange, 3/8-16 X 1.25" .......... 4
5 ............. 333331 ............ Nut, Nylon Lock, Flanged, 3/8-16 ......... 10
Compare the contents of the Cradle Shipping Box with the “Parts Supplied” list
above. If you have any questions please contact us at www.DRpower.com or call
1-800-DR-OWNER (376-9637) for assistance.
1. Open the Cradle Box using a Utility Knife.
2. Cut the Straps that secure the Cradles together with Wire Cutters.
3. Support the end of the Beam with a Jack Stand or equivalent to position the
Beam parallel with the ground.
4
Figure 2
5
3
2
1