DR Power 14.5 HP Pro (November 2014 - Present) User Manual
Page 11
Advertising
CONTACT US AT www.DRpower.com 11
Stopping the Engine
1.
Slowly release the Throttle Control Lever to the idle position (Figure 10).
2.
Release the Operator Presence lever to stop the Engine.
Before You Begin
Dig away the earth and remove any stones near the tree stump that may interfere with your work.
Check that the ground is free of foreign objects, such as electrical cables, barbed wire, etc.
Cut the stump as close to the ground as possible using a Chainsaw before using the Stump Grinder.
Advertising
This manual is related to the following products: