DR Power 14.5 HP Pro (November 2014 - Present) - Manual (Page 24)

24 DR ® STUMP GRINDER
Chapter 6: Parts Lists and Schematic Diagrams
Parts List - HANDLEBAR ASSEMBLY
NOTE: Part numbers listed are available through DR Power Equipment.
Ref# Part# Description
1 11238 Washer, Flat, 1/4"
2 11158 Bolt, HCS, 5/16-18 X 1, ZP
3 11076 Nut, Nylon Lock, 5/16-18, ZP
4 35247 Frame, W/Labels
5 26476 Guard, Debris, STG
6 11163 Screw, #10 x 1-1/2", type A
7 17912 Screw, 1/4-20 X .500, Tri-Lobe
8 15712 Bolt, HCS, 3/8-16 X 2-1/4, GR5, ZP
9 15043 Bolt, HHCS, 3/8-16 X 1-1/4, GR5
10 13443 Bolt, HCS, 5/16-18 X 1-1/2, GR5, ZP
11 11241 Washer, Flat, 5/16", USS, ZP
12 11075 Nut, Nylon Lock, 3/8-16, ZP
13 11214 Cable Tie, 7-1/2"L
14 24729 Handlebar, Left
15 24730 Handlebar, Right
16 26567 Cross Member, Handlebar
35948 Cross Member, Handlebar
17 26479 Bracket, Brake Cable
18 16518 Lever, Brake w/lock
19 18069 Lever, Op Presence w/wire
Ref# Part# Description
20 16495 Grip, Ergonomic, 1"
21 26478 Cable, Brake
22 26480 Throttle
23 16496 Grip, 1.00"
24 15131 Plug, Hour Meter Hole, 2" X 1-1/4"
25 26519 Label, Control Panel, Front
26 25709 Label, Safety Icons
27 26488 Label, Head Rotation
28 23494 Label, DR Logo, 6" Round 4 Color
29 23545 Label, CHP Address, 2.75x.75
30 359721 Nut, 5/8-18, Low Profile
31 11308 Switch, Key B805 W/Hardware
Not Illustrated
Optional Maintenance Meter Kit:
35454 Wire Harness, Stump Grinder OPC
(Premier)
35369 Wiring Harness, Stump Grinder (Pro and
Pro-XL)
17929 Plug, Control Panel, With Cutout
21720 Meter, Hour/RPM/Maintenance