DR Power 14.5 HP Pro (November 2014 - Present) - Manual (Page 20)

20 DR ® STUMP GRINDER
Replacing the Battery
Tools Needed:

Two 7/16" Wrenches
1. Disconnect the Battery Terminals (Figure 30).
2. Remove the Bolts and Locknuts that secure the Battery Clamp using two
7/16" Wrenches.
3. Remove the Clamp and the dead Battery.
4. Install the new Battery.
5. Install the Battery Clamp and secure with the Bolts and Locknuts using two
7/16" Wrenches.
6. Attach the Battery Terminals. Black Wire to negative black Terminal and Red
Wire to positive red Terminal.
Disposing of the Battery Responsibly (Electric-Start Models)
The Battery is a sealed lead-acid Battery. Recycle or dispose of it in an environmentally sound way.
 Do not dispose of a lead-acid Battery in a fire; the Battery may explode or leak.

Do not dispose of a lead-acid Battery in your regular, household trash. Law in most areas prohibits incinerating, disposing in a
landfill, or mixing a sealed lead-acid Battery with household trash.
Recycling a Used Battery
Please dispose of your used Batteries responsibly by recycling them. Call your local Solid Waste Management District or your
local waste handler to locate the collection site nearest you. Some collection sites recycle Batteries year-round; others collect
them periodically.
You can also visit the Web site of Earth 911 for more information [www.earth911.org].
For a fee, you can recycle your Batteries with the International Metals Reclamation Company. Visit them at www.inmetco.com and
click Services; or contact them at:
INMETCO
One INMETCO Drive
Ellwood City, PA 16117
(724) 758-2800; fax (724) 758-2845
To learn more about hazardous waste recycling, visit the Web site for Battery Council International [www.batterycouncil.org] or for
the Environmental Protection Agency [www.epa.gov].
Battery
Clamp
Figure 30
Bolts and Locknuts
Battery
Terminals