ESI Waveterminal 192M - Manual (Page 19)

ESI Waveterminal 192M
20
1. SPDIF Optical Input (24bit/96kHz)
Caution:
Although MI/ODI/O’s Tos-Link Optical I/O port can’t support 192kHz in specification,
we got the reports shows possibility while we were testing. However, it heavily depends
on system environment, It may have problem on over 100kHz sample rate. You have to
use high quality Optical cable otherwise you may get loss of data or distortion.
2. External connector port
This port is connecting for the exclusive external connection cable. This cable is
provided with the MI/ODI/O.
As next picture, the cable consists of five connectors. On one end, there is an 8-pin
connector to MI/ODI/O. The other end, there are two small connectors for SPDIF
digital In/Out port and large connectors for MIDI interface In/Out. These four cables are
labeled for easier distinction.