ESI Waveterminal 192M - Manual (Page 35)

ESI Waveterminal 192M
36
4. Sonar/Cakewalk
Before you using Sonar, you have to do several setting first.
You have to set proper latency on the control panel of 192M.
After launching sonar, Go to ‘Option’ -> Audio and select ‘Wave Profiler’ of ‘General’
tab. Unless Sonar can’t recognize buffer of 192M.
In the case of Sonar:
Like an above picture, select ‘Waveterminal 192M Multi-10ch 1~10’ for using WDM
driver.
In the case of Cakewalk:
Cakewalk has to use MME driver, therefore select ‘Waveterminal 192M 1,2,,,9,10
(2ch)’ drivers.