ESI Waveterminal 192M - Manual (Page 21)

ESI Waveterminal 192M
22
6. Waveterminal 192M Console
If you complete the Waveterminal 192M hardware and driver installation, you need to
learn about the Waveterminal 192M Console. This console is what you control your
setup for the Waveterminal 192M.
The Waveterminal 192M Console is built for easy to use. However, it could give a
complicated look since there are many inputs and outputs. All input and output controls
are the same. So, if you learn about one control, you can use the others easily.
After successfully installing Waveterminal 192M hardware and driver, you can see the
icon on the system tray. It is the Waveterminal 192M control panel icon and clicking
on this icon will launch the console.
1. Pull Down Menu
The Waveterminal 192M console includes a pull down menu bar that contains the
configuration menus for the Console
1. File - Exit
File – Exit will close the Waveterminal 192M console window but it will not shut down
the Console. You can always launch the Console by clicking icon on the system tray.