ESI Waveterminal 192M - Manual (Page 25)

ESI Waveterminal 192M
26
LINE
When you select this button, 192M accepts LINE Input 1&2.
MIC
When you select this button, 192M accepts MIC Input 1.
6. Input 3,4
Monitor in
During MIX button is selecting, Selecting this button makes that Analog Input 3,4
signals goes to Output 1,2 and also Headphone 1,2(stereo).
You can monitor Input signal in real-time.
* Regardless of MIX on/off, you can always monitor mixed signals from
Headphone 2. It’s very useful in Studio’s control room.
LINE
When you select this button, 192M accepts LINE Input 3&4.
MIC
When you select this button, 192M accepts MIC Input2.
ANALOG
When you select this button, 192M accepts Line or MIC input as WT192M’s input 3,4.
DIGITAL
: When you select this button, 192M accepts Digital Input of MI/ODI/O as 192M’s
input3,4
Optical
: When you connect WT192M with MI/ODI/O, you can select MI/ODI/O’s Optical
Input as digital input.
Coaxial
: When you connect WT192M with MI/ODI/O, you can select MI/ODI/O’s Coaxial
Input as digital input.
PRO & CONSUMER
: Digital format selector.
When you use WT192M’s digital ports, this is where you to set various digital format.
Pro (IEC 958 Type I)
: WT192M’s digital in/out format is AES/EBU.