Dell OptiPlex GX240 User Manual
Page 114
Advertising
116
Installing Upgrades
w
w
w
.d
e
ll
.co
m
|
s
u
p
p
o
rt
.d
e
ll.c
o
m
S m a l l M i n i -To w e r C o m p u t e r
2
Check all connectors to be certain that they are properly cabled and
firmly seated.
NOTICE:
To avoid possible damage to the computer, you must match the
colored stripe on the hard drive data cable with pin 1 on the hard drive (IDE1)
connector and with the system board interface connector (IDE1).
To locate the IDE connector 1 (IDE1) on the system board, see
“
.”
3
On the small desktop computer, replace the hard drive shroud by
inserting the two tabs on the bottom into the holes in the computer
and snapping the top into place.
4
, reconnect your computer and devices to
their electrical outlets, and turn them on.
1
power cable
2
IDE cable
3
IDE1 connector
3
1
2
Advertising