Dell OptiPlex GX240 - Manual (Page 122)

124 Installing Upgrades
w
w
w
.d
e
ll
.co
m
|
s
u
p
p
o
rt
.d
e
ll.c
o
m
Installing a Floppy Drive and Reattaching Cables
Small Form-Factor Computer
1 Snap the replacement floppy drive into the sled and ensure that it is
secure in the sled.
2 Gently slide the floppy drive into the computer until the tabs securely
click into position.
3 Connect the interposer board to the floppy drive.
4 Attach the power cable to the interposer board on the floppy drive.
5 Connect the strip cable to the DSKT connector on the system board.
S m a l l Fo r m - Fa c t o r C o m p u t e r
6 Check all cable connections, and fold cables out of the way to provide
airflow for the fan and cooling vents.
7 Close the computer cover , reconnect your computer and devices to
their electrical outlets, and turn them on.