Fat Bagger 500 REMOVABLE TOURPAK MOUNT User Manual
Page 8
138 East Lincoln Ave. | Chariton, Iowa 50049 | (641) 774-7499 | fax: (641) 774-7505 | www.fatbaggers.com
Page 4—FBI500-09-FIX Removable Trunk Mount
Page 5—FBI500-09-FIX Removable Trunk Mount
IMAGE #8 Close-up of bolt to be
replaced at top of chrome rail
IMAGE #7 Note the chrome saddlebag support
rail that comes up and is bolted into the fender
strut. That bolt is removed & replace with new rear
mounting hardware.
IMAGE #6 Rear mounting
hardware to go together like
this and bolt into fender strut.
IMAGE #9 With top shock bolt removed and shock
pivoted out of the way, Install front mounting
hardware as shown—narrow washer on first, then the
thick washer with recessed back and large hole.
Recess in back of washer faces toward bike.
IMAGE #5 Hardware included with
Removable Trunk Mount Kit. In addition,
(4) ¼” X 1” Hex Head Bolts with nuts and
flat washers are also included.
IMAGE #4 View of the space
behind the front shock--
serves as the front mounting
point.