Fire Magic 3100-51 Deluxe Grill & Grill Accessory Insulating Liner - Manual (Page 2)

2 REV 0 - 1502100720 L-C2-465
SPECIFICATIONS (cont.)
CUTOUT DIMENSIONS
3100-51 3278-51 3287-51
A Countertop to unit bottom cut-out 12
1
/
4
" 12" 11
5
/
8
"
B Side to side cut-out 28
1
/
8
" 22
3
/
4
" 18
1
/
4
"
C Front to back cut-out * 19
3
/
8
" 20
7
/
8
" 24
3
/
4
"
D Liner fl ange width cut-out † 29
3
/
8
" 24" 19
3
/
8
"
* Includes any substrate at front wall of enclosure (in the areas the liner fl anges are to sit fl ush against).
See SUBSTRATE section on next page.
† Only applicable for enclosures that have countertops with an overhang (see illustration and section below).
TOP VIEW
Non-combustible
Countertop
Countertop
overhang
ENCLOSURE
CUT-OUT
DIMENSIONS
Fig. 2-1
FRONT VIEW
B
C
D
Countertop
overhang
X
TOP VIEW
(Countertop)
Y (Overhang)
A
Drawings
not to scale
(Liner
fl ange)
(Liner shown
for clarity)
Countertop Overhang
The liner front fl anges are designed to sit fl ush against the enclosure front wall. If the countertop extends beyond the front
wall, creating a countertop overhang, it must be cut fl ush with the front wall for the width of the liner fl anges or a gap will
be created exposing the forward portions of the left and right side liner walls. See illustrations above.
Important: FOR YOUR SAFETY, you must provide openings in the island enclosure for drainage, replacement air, and
cross-ventilation of any storage area exposed to possible leakage from gas connections, the unit, or propane
bottles. See the ENCLOSURE REQUIREMENTS section in appliance owner's for details.
See next page
for substrate
considerations
X= D-B÷2
Y= Total
Countertop
Overhang