Disclaimer – Flowserve Limitorque MX DeviceNet Field Unit User Manual

Page 2

Advertising
background image

Limitorque MX DeviceNet Field Unit FCD LMENIM2328-00 – 11/05

2

Limitorque MX DeviceNet Field Unit Installation and

Operation Manual

©2005 Copyright Flowserve. All rights reserved. Printed in the United States of America

Disclaimer

This document is meant for use with the Limitorque MX Installation and Operation Manual for MX-05
through MX-40. Information in this document is also applicable to MX-85, MX-140, and MX-150. No
part of this book shall be reproduced, stored in a retrieval system, or transmitted by any means, elec-
tronic, mechanical, photocopying, recording, or otherwise without the written permission of Limitorque.
While every precaution has been taken in the preparation of this book, the publisher assumes no
responsibility for errors or omissions. Neither is any liability assumed for damages resulting from the
use of the information contained herein.

This document is the proprietary information of Flowserve, furnished for customer use ONLY. No other
uses are authorized without written permission from Limitorque.

Limitorque reserves the right to make changes, without notice, to this document and the products it
describes. Limitorque shall not be liable for technical or editorial errors or omissions made herein;
nor for incidental or consequential damages resulting from the furnishing, performance or use of this
document.

The choice of system components is the responsibility of the buyer, and how they are used cannot be
the liability of Limitorque. However, Flowserve Limitorque’s sales team and application engineers are
always available to assist you in making your decision.

This manual contains information that is correct to the best of Flowserve’s knowledge. It is intended
to be a guide and should not be considered as a sole source of technical instruction, replacing good
technical judgment, since all possible situations cannot be anticipated. If there is any doubt as to exact
installation, configuration, and/or use, call Flowserve Limitorque at (434) 528-4400. The latest revisions
to this document are available online at http://www.limitorque.com

Advertising