Flowserve L120 Series Limitorque Actuation Systems - Manual (Page 5)

5
Limitorque Actuation Systems L120 Series FCD LMENIM1201-04-AQ – 05/15
flowserve.com
2
Product Capabilities and Features
L120 Series actuators operate without modification in any rising or non-rising stem application for
linear action valves.
The actuators meet rigid safety requirements. The actuators are available in weatherproof, explosion-
proof, and submersible configurations.
The actuators are compatible with a wide range of control options from stand-alone units with local
pushbutton to open standards-based DDC-100 networks with up to 250 actuators.
The actuators are designed with integral control packages including plug-in interconnect boards that
increase control functionality for stand-alone or networked units.
Durable torque overload is provided in both directions of travel.
2.1 Initial Inspection and Storage Instructions
c WARNING: Read this Installation and Maintenance Manual carefully and completely before
attempting to store the actuator. Be aware of the electrical hazards.
2.1.1 Inspection and Recording
Upon receipt of the actuator, inspect the condition of the equipment and record nameplate
information:
1. Carefully remove actuator from shipping carton or skid. Thoroughly examine the
equipment for any physical damage that may have occurred during shipment. If
damaged, immediately report the damage to the transport company.
2. Record the actuator nameplate information for future reference; i.e. ordering parts,
obtaining further information.