Flowserve 3400MD Digital Positioner - Manual (Page 27)

27
Logix 3400MD Digital Positioner FCD LGENIM3404-08-AQ – 5/15
flowserve.com
Fieldbus
Block Index
Fieldbus
Variable Name
Transducer
Block
Fieldbus
Datatypes
Logix Positioner
Description
Register Type
Fix
Pt
Rd
Variable
Name
R/W
35 STOP_HI_POS
XDTB_
MAIN
FLOAT 62 S_INT /100 SoftStopHigh SRW Setup, Soft Stop Limit, Upper
36 STOP_LO_POS
XDTB_
MAIN
FLOAT 63 S_INT /100 SoftStopLow SRW Setup, Soft Stop Limit, Lower
37
STROKE_TIME_
OPEN_LIM
XDTB_
MAIN
FLOAT_S 64 U_INT NO
StrokeOpen-
Time
NRW
Setup, Stroke Delay Time,
Opening
38
STROKE_TIME_
CLOSE_LIM
XDTB_
MAIN
FLOAT_S 65 U_INT NO
StrokeClos-
eTime
NRW
Setup, Stroke Delay Time,
Closing
43 CURVE_X
XDTB_
TECH
FLOAT 66 S_INT /100
CURVEx
[1-11]
SRW
Setup, SW Characterization,
X-Axis, Points 1-11
43 CURVE_X
XDTB_
TECH
FLOAT 67 S_INT /100
CURVEx
[12-21]
SRW
Setup, SW Characterization,
X-Axis, Points 12-21
44 CURVE_Y
XDTB_
TECH
FLOAT 68 S_INT /100
CURVEy
[1-11]
SRW
Setup, SW Characterization,
Y-Axis, Points 1-11
44 CURVE_Y
XDTB_
TECH
FLOAT 69 S_INT /100
CURVEy
[12-21]
SRW
Setup, SW Characterization,
Y-Axis, Points 12-21
Control: Calibration Parameters
25 CALIBRATE
XDTB_
MAIN
UNSIGNED 8 33 U_CHAR NO Cal_State RW Test, Calibration, Mode Setting
45
STROKE_TIME_
CAL
XDTB_
TECH
FLOAT 70 U_INT /100 StrokeTime R
Calibration, Measured Stroke
Time
46
STROKE_TIME_
DOWN
XDTB_
TECH
FLOAT 71 U_INT /100 StrokeTimeDn R
Calibration, Measured Stroke
Time
47
STROKE_TIME_
UP
XDTB_
TECH
FLOAT 72 U_INT /100 StrokeTimeUp R
Calibration, Measured Stroke
Time
48 HALL_DOWN
XDTB_
TECH
UNSIGNED 16 75 U_INT NO Hall_Down SRW
Calibration, Hall Sensor, A/D
Counts, Down Position
49 HALL_UP
XDTB_
TECH
UNSIGNED 16 76 U_INT NO Hall_Up SRW
Calibration, Hall Sensor, A/D
Counts, Up Position
50 HALL_RANGE
XDTB_
TECH
UNSIGNED 16 77 U_INT NO Hall_Range SRW
Calibration, FB, Valve Stem,
A/D Counts, Range
51
HALL_AD_
COUNT
XDTB_
TECH
UNSIGNED 16 78 AD_REG NO Hall_Instant R
Status, Hall Sensor, A/D
Counts, Instantaneous
52
HALL_NULL_
PCT
XDTB_
TECH
UNSIGNED 16 79 S_INT NO Hall_Null SRW
Calibration, Hall Sensor, A/D
Counts, Null Position
53 FB_ZERO
XDTB_
TECH
UNSIGNED 16 80 U_INT NO FB_Zero SRW
Calibration, FB, Valve Stem,
A/D Counts, @Zero%
54
HOURS_SINCE_
RESET
XDTB_
MAIN
FLOAT 138 U_LONG /10 Reset_Hours R
Status, System, Time Elapsed,
Mem Reset
55
HOURS_LIFE-
TIME
XDTB_
MAIN
FLOAT 139 U_LONG /10
Lifetime_
Hours
R
Status, System, Time Elapsed,
Lifetime
86 ERROR_HIST
XDTB_
TECH
ARRAY 140 U_CHAR NO ErrorHist [16] R
History of the last error/blink
codes
Signature Parameters
56 SIG_START
XDTB_
MAIN
FLOAT 142 S_INT /100 SIGstart NRW
Config, Signature, Starting
Command in %
57 SIG_STOP
XDTB_
MAIN
FLOAT 143 S_INT /100 SIGstop NRW
Config, Signature, Stopping
Command in %
58 SIG_RATE
XDTB_
MAIN
FLOAT 144 U_INT /100 SIGtime NRW
Time that a Signature takes to
complete a ramp cycle
59 SIG_HOLD
XDTB_
MAIN
FLOAT 145 U_INT /100 SIGhold NRW
Time to continue to log
signature data after reaching
SIG_STOP