Flowserve MX Dashboard Limitorque - Manual (Page 22)

22
FCD LMENIM2338-01
Position encoder
The MX/QX actuator utilizes a unique encoder design consisting
of absolute and incremental encoders. The
diagnostic data provides the real-time status of the encoder
at the time of evaluation.
relay summary status
If optional relay board is installed in the actuator, the
operational state of the board is provided. The standard
relays consist of S1 and S2 relays. R1-R8 are optional.
Motor thermistor
This table provides real-time information since the last reset.
The temperature in Therm 1 represents the present motor
temperature; Therm 2 displays the highest temperature
recorded during any operation.