Flowserve NRG 16-40 - Manual (Page 21)


■
Wire equipment in series. Star-type wiring is not permitted!
■
Interlink screens of control cables such that electrical continuity is ensured and
connect them once to the central earthing point (CEP).
■
In a CAN bus network the first and last equipment must be provided with a
terminating resistor of 0 Ω. Fig. 22.
■
The CAN bus network must not be interrupted while operating.
An interruption will result in high/low level alarm!
Tools
Attention
■
Screwdriver for cross head screws, size 
■
Screwdriver for slotted screws, size .5, completely insulated according to VDE 0680
■
Open-end spanner 7 mm A. F.
Wiring
continued