Flowserve NRG 16-40 - Manual (Page 27)

7
Declaration of conformity
Annex
We hereby declare that the equipment NRG 16-40, NRG 17-40, NRG 19-40 and NRG 111-40
conform to the following European guidelines:
■
LV guideline 73/3/eec version 93/68/eec
■ EMC guideline 89/336/eec version 93/68/eec
■
ATEX Directive 94/9/EC of 3 March 994
■
Pressure Equipment Directive PED 97/3/EC of 9 th May 997 (provided that the equipment is not
excluded from the scope of this directive according to section 3.3)
Applied conformity assessment procedure: Annex III, Module B and D, verified by the notified body
055 .
This declaration is no longer valid if modifications are made to the equipment without consultation
with us.
Decommissioning
Danger
Risk of severe burns and scalds to the whole body!
Before removing the level electrode make sure that the vessel and the measuring pot are
depressurised (O bar) and cooled down to room temperature (0 °C).
Disposal
Remove the level electrode and separate the waste materials in accordance with the material
specification.
Electronic components (boards) must be disposed of separately.
For the disposal of the level electrode observe the pertinent legal regulations concerning waste
disposal.
Bremen, 3 rd January 005
GESTRA AG
Dipl.-Ing. Lars Bohl
(Academically qualified engineer)
Quality Assurance Manager
Dipl.-Ing. Uwe Bledschun
(Academically qualified engineer)
Head of the Design Dept.