Fluke Biomedical IDA-1S - Manual (Page 13)

Infusion Device Analyzer
Symbols
3
• Do not reuse test tubing or syringes for patient infusion.
• Avoid possible contamination of reusable components due
to backflow conditions. Some older style infusion devices
may have reusable components that could come in direct
contact with the fluids being pumped. When testing these
types of devices take care to avoid possible contamination
of reusable components.
 Caution
To prevent possible damage to the product or to equipment
under test:
• Only use degassed de-ionized water with the Product.
Wetting agent may be added.
• Remove internal water before shipping or storing. Do not
use compressed air to clean out the Product.
• Do not expose the Product to temperature extremes. For
proper operation, ambient temperatures should be from
15
°C to 30 °C (59 °F to 86 °F). Performance may be
adversely affected if temperatures fluctuate above or below
this range. For Storage Temperature limits, see the
Specifications section.
• Do not use the Product in close proximity to sources of
strong electromagnetic radiation (for example, unshielded
intentional RF sources). These sources may interfere with
proper operation.
Symbols
Table 1 is a list of symbols used on the Product and in this document.
Table 1. Symbols
Symbol Description Symbol Description

Risk of Danger. Important
information. See Manual.

Hazardous voltage. Risk of
electric shock.

Power input

USB

Recycling information

Conforms to European Union
directives

Conforms to relevant North
American Safety Standards.  Conforms to relevant Australian
EMC standards

This product complies with the WEEE Directive (2002/96/EC) marking requirements.
The affixed label indicates that you must not discard this electrical/electronic product
in domestic household waste. Product Category: With reference to the equipment
types in the WEEE Directive Annex I, this product is classed as category 9 "Monitoring
and Control Instrumentation" product. Do not dispose of this product as unsorted
municipal waste. Go to Fluke’s website for recycling information.