Fluke Biomedical IDA-1S - Manual (Page 29)

Infusion Device Analyzer
Product Maintenance
19
Clean the Product (Outside)
To clean the outside of the Product, disconnect from the power supply and use
only a damp cloth with mild detergent.
Clean the Product (Inside)
It is possible that microbial growth can become present in the measuring module
of the Product. It is recommended that you clean the fluid paths at 3 month
intervals. To clean the inside of the Product, inject 20 ml of a warm water and
detergent solution into the Fluid Inlet Port. After 5 minutes, flush with clean water.
Always pass water from the fluid inlets to the outlets.
Replaceable Parts
Table 11 lists the replaceable parts for the Product.
Table 11. Replaceable Parts
Item
Fluke Biomedical
Part Number
IDA-1S Infusion Device Analyzer 4468525
Hydrograph software and IDA-1S Users Manual on CD 4418071
Plastic syringe (20 ml) 4497350
3-way Luer plastic stop-cock 4480194
Drain tube (1 m) 4478942
Micro-90
 (225 ml)
4541948
USB Cable 1740487
Power supply, 4-plug mains adapter kit for US, UK, EURO, AUS 2461300
IDA-1S power supply cord without mains adapters, universal wall mount 4329971
NiMH Battery 4481150
IDA-1S Getting Started Manual 4426198