Fluke Biomedical PS410 User Manual
Page 17
ECG Simulator
Controls and Terminals
9
Table 1. Controls and Terminals (cont.)
Item Name
Description
MENU
Pressing this key causes the code line preset to increase. Each time you press the key, the
code line preset increases by 1 unit.
E
ENTER
Pressing this key executes the selected simulation.
Ten snap and multi-banana connectors for ECG output, allowing for connection to any
twelve-lead ECG. Labels for these terminals appear on the front panel. The labels are
AHA/IEC color-coded to aid in matching them to corresponding patient leads. Labels and
their definitions are as follows:
Label Description
RA / R
Right Arm
LA / L
Left Arm
RL / N
Right Leg (Reference or grounded)
LL / F
Left Leg
F
ECG Connectors
V1 / C1 to V6 / C6 V leads (US and Canada). Also referred to as pericardial, precardial
or unipolar chest leads, and chest leads (IEC)
G
Menu Selection
This lists all code line values that you can execute in the Simulator.
H
Battery Compartment Compartment for holding a 9-V alkaline battery.