Fluke Biomedical PS410 - Manual (Page 20)

PS410
Users Manual
12
Code Display Selects ECG amplitude of:
00 SEN .5mV 0.5 mV
01 SEN 1mV 1.0 mV
02 SEN 2mV 2.0 mV
NSR
The Simulator replicates fifteen normal sinus rhythms, or
NSRs. These NSRs are set through direct code entry, as
follows. After selecting the preset, press ENTER. To
change the NSR use the UNITS keys ( ) to scroll to the
available presets.
Code Display Selects NSR rate of:
03 30 BPM 30 BPM
04 40 BPM 40 BPM
05 60 BPM 60 BPM
06 80 BPM 80 BPM
07 100 BPM 100 BPM
08 120 BPM 120 BPM
Code Display Selects NSR rate of:
09 140 BPM 140 BPM
10 160 BPM 160 BPM
11 180 BPM 180 BPM
12 200 BPM 200 BPM
13 220 BPM 220 BPM
14 240 BPM 240 BPM
15 260 BPM 260 BPM
16 280 BPM 280 BPM
17 300 BPM 300 BPM
Adult and Pediatric NSR QRS
You can set an adult NSR with a QRS width of 80 ms or a
pediatric NSR with a QRS width of 40 ms. These will
remain in effect throughout ECG and arrhythmia
selections until changed by reentering the following codes
and pressing ENTER.