Formax 2200 Series - Manual (Page 7)

3. PROPER HANDLING OF THE MACHINE
The 2200 Series Folder/Sealer line machines are built for folding and sealing pressure
sensitive forms.
They are unsuitable for handling other materials such as foil, plastics and textiles.
The manufacturer / distributor is not responsible for damages resulting from such
unsuitable applications. Responsibility lies alone with the user.
Reading the Operator’s Manual and observing the conditions for inspection and
maintenance are part of the proper handling of the machine.
Installation of the machine, i.e. assembling as well as electrical and pneumatic work
should be carried out only by skilled personnel authorized by the manufacturer or his
representatives. Additional instructions are provided for this purpose.
Repairs and service should be carried out only by skilled personnel authorized by the
manufacturer or his representatives.
The interval between inspections including safety-related functions depend on the
machine usage.
For regular one-shift-operation, two inspections per year is recommended.
The machine needs a fl at surface for installation.
The machine weight should be considered when choosing a location for the machine.
The levelling screws in the undercarriage of the machine can compensate for an
uneven fl oor to a certain degree.
To ensure stability during operation the machine should be secured by means
of the levelling screws.
The line voltage must correspond to the voltages on the serial plate.
No harmful emissions are produced.
Read the Operator’s Manual before working with the machine.
We recommend to carry out all operations and settings in the sequence mentioned in
this manual.
The terms “right” and “left” in the following text always refer to the
direction of paper travel. Therefore the left side is the operator side.
Operator's Manu al 2200 Series General
7