Formax 7102/7102XT Series - Manual (Page 38)

4. If further enclosures are required, press the Select button and repeat steps 1 to 4.
Repeat as required up to the limit of available stations.
You now have a choice: to proceed and move on to Fold Settings, or to assign the
documents/enclosures to specific hoppers.
The following assumes you want to assign the documents/enclosures to specific
hoppers. This will override the hopper that the software automatically assigns.
If you do not want to assign the documents/enclosures to specific hoppers,
press the Next button shown in the previous screen.
Otherwise, press the Document Placement button shown in the previous screen.
This will display a placement box:
7
English
35
| Page 35 | aug-29-2014 10:01 | Creating a job