Formax 7102/7102XT Series - Manual (Page 85)

Minimum: 70gsm (18lbs bond)
Maximum: 100gsm (28lbs bond) Envelope
weight
• Envelope to be good quality machine-fill type. Dimensions and
quality to be consistent across manufactured batches.
• Side seams must be securely glued to the top of the seam.
• Flap crease must be pre-scored to enable the envelope flap to
open flat.
• No glue seepage must be evident on interior or exterior of envel-
ope.
• Windows to be securely affixed to within 1.5mm
(1/16”) of top and side edges. Top edge to be flat and
free from puckering.
General envel-
ope require-
ments
Up to
00 filled envelopes (assumes 1 document inserted) 2XWSXWFRQYH\
-er capacity)
Envelope details
82
| Page 82 | aug-29-2014 10:01 | Technical Specification
10
English