Formax 7102/7102XT Series - Manual (Page 55)

2. Adjust the angle of the backrest (see below) and load the envelopes into the hopper,
flaps forward, so that the lower edges follow the contour of the surface and down into
the pick-up roller. Move the backrest forward (see below) so the the envelopes are
fully forward, but not tightly packed.
3. Move the backrest forward by squeezing the handle upwards to release the rollers
from the track.
Adj
ust the width of the panels to suit the envelope.
Adjust the angle by
loosening the knob each side.
C4: Fully raised
DL/DL+: Fully lowered
If the envelopes feed erratically, try a backrest angle in-between.
52
| Page 52 | aug-29-2014 10:01 | Loading the paper hoppers
8
English