Formax 7102/7102XT Series - Manual (Page 90)

Enclosures must be flexible enough to suit
path constraints.
Some enclosures may require special tyres. Requirements
Feeder Folder
Parameters
140mm (51/2”) min. (89mm (3½”) for unfol-
ded inserts)
406mm (16”) max. (139mm (5½”) for unfol-
ded inserts) Depth:
140mm (51/2”) min. (Widths below 168mm
(6.6”) require narrow finger kit A3348A).
229mm (9”) max. Width:
60gsm (16lbs bond) min.
70gsm (18lbs bond) min. for OMR/Barcode
paper
120gsm (32lbs bond) max. Thickness:
89mm (31/2”) min.
152mm (6”) max. Depth of output doc:
Up to 500 sheets of 80gsm (20lbs bond) Hopper capacity:
Up to 3 sheets (C or Z fold) or 5 sheets (V
fold) of 80gsm (20lbs bond). May be stapled
or not, but staples on ‘Z’ fold only. Max.
thickness of staple 2mm. Allowable staple
positions shown below. Note: all daily post
forms must be the same length.
Note: Daily Post is not available as an option
if a CIS reader is fitted.
Daily Post:
10
English
87
| Page 87 | aug-29-2014 10:01 | Technical Specification