Dell DPND-523-EN12 - Manual (Page 138)

138 | Backup and Restore
Network Discovery
Restoring from tape
If you have configured a backup USB tape drive, you can use this procedure to
restore your data.
To restore your data from a tape
1 Click Administration > Backup and restore > Restore from tape.
2 You can choose whether or not you will keep your current scan files if there
are none in the backup.
3 If Network Discovery has been set up for e-mail, choose whether or not an
e-mail notification will be sent and to whose account.
4 Click Restore.
5 When the restore is complete, you can check the restore log by clicking
Administration > Backup and restore > View restore log.
Restoring from another appliance
This procedure is useful for migrating data from one Peregrine appliance to
another. If one appliance has been damaged, you should use this procedure to
move your data to a new appliance.
The following list offers a summary of the tasks you need to perform.
„
Step 1: Setup your new Peregrine appliance , but do not connect it to the
network.
„
Step 2: On your old appliance, do an internal backup
„
Step 3: Connect the crossover cable between the two appliances
„
Step 4: Check the connection between the two appliances
„
Step 5: Remove the old appliance from the network
„
Step 6: Connect the new appliance to the network
„
Step 7: Log in to the new appliance
„
Step 8: Restore on new appliance