Dell DPND-523-EN12 - Manual (Page 98)

98 | Set up Network Discovery
Network Discovery
Import your IPv4 ranges from a CSV file
Instead of entering all your IP ranges manually, you can import them from a CSV
file. The file must be set up properly, as in the example below.
To import IPv4 ranges from a CSV file
1 Click Administration > Network configuration > Import IPv4 Range
Definitions.
2 Click the Browse button to select your CSV file.
3 If you wish to delete your existing IPv4 ranges before you import the CSV
file, click Yes.
4 Select a default Property Group/Set.
Note: If you have not specified Property Groups/Sets in your CSV file, you can
choose one to apply to all of your IPv4 ranges. If you have specified
Property Groups/Sets for some of the IP ranges in the CSV files, the ones
in the CSV file will take precedence. If you do not specify Property
State whether this
is a range or a
subnet Starting IP
address Ending IP
address or
netmask Define whether this is a
Property Group or
Property Set (Set, Network,
Community, Scanner,
Listener) The name of the Property
Group or Property Set you’ve
specified in the previous
column. The name must be
exactly as it appears in the
Network Configuration page.