Fronius Acctiva Professional 35A - Manual (Page 17)

15
EN
General information
Principle The main feature of the new Active Inverter Technology is intelligent charging. This means
that the charging behaviour adapts itself automatically to the age and state of charge of the
battery. This innovation extends the battery's service life and reduces the amount of main-
tenance required, while at the same time improving efficiency.
Active Inverter Technology is based on an inverter with active rectification and an intelli-
gent safety cut-out. The charging current and voltage are held constant by a digital control
that is not affected by any fluctuations in the mains voltage.
Device concept The compact design reduces space requirements and makes portable use considerably
easier. In addition to its many existing features, the charger is also of modular design, mak-
ing it perfectly capable of accommodating future requirements. A wide range of options is
available. A 14.4 V voltage limit provides optimum protection for the vehicle electronics.
Warning notices
on the device A number of safety symbols can be seen on the charger's rating plate. The safety symbols
must not be removed or painted over.
Do not use the functions until you have fully read all the operating instructions.
Possible sources of ignition, such as fire, sparks and naked lights, must be kept
away from the battery.
Risk of explosion! Detonating gas is generated in the battery during charging.
Battery acid is corrosive and MUST be kept away from eyes, skin and clothes.
Ensure an adequate supply of fresh air during charging. Fit charger at least 50
cm above the floor.
Do not dispose of used chargers with domestic waste. Dispose of them accord-
ing to safety rules.
20122005-22
00000000
4,010,335
SN:
In:
Out.:
Art. Nr.:
Acctiva Professional 35A
~230V 50/60Hz;1120W
DC 2V-31V/35A
A-4600 Wels
www.fronius.com
IP
40
Always stop charging before you disconnect the charging cable!