Fronius Selectiva Plus (three-phase) - Manual (Page 44)

14
Charged capacity at the start of re-charging
(Only for characteristics with charging factor control)
Battery capacity
Set the capacity of the battery to be charged
Number of cells
Set the number of cells in the battery to be charged
Temperature-controlled charging (option)
Activate/deactivate temperature-controlled charging option
Electrolyte circulation pump (option)
Activate/deactivate electrolyte circulation pump option
Date (only with RS 232 option)
Set current date
Time (only with RS 232 option)
Set current local time
Save settings
Save/do not save settings. Exit Set-up menu
Set-up menu/
service level 2
+ Press for approx. 40 seconds
Start of charging
Set time at which charging should start
Date
Set current date
Time
Set current local time
Start delay time
Set a charging start delay time. Setting interval 10 mins
Electrolyte circulation pump program
Set up electrolyte circulation pump program (for further information
contact customer service).
Charger lead length
Set charger lead length
Charger lead cross-section
Set charger lead cross-section
Important! If you continue to press the INFO button, the charger automatically
switches from service level 2 to service level 1.
Charging factor with activated electrolyte circulation option
Set charging factor with activated electrolyte circulation
(only for characteristics with charging factor control)
Set-up menu/
service level 1
(continued)
Charging factor
Set charging factor
(only for characteristics with charging factor
control)