GAI-Tronics 234WM Wall-Mount Stanchion Assembly - Manual (Page 4)

Pub. 42004-308F
Model 234WM Wall-Mount Stanchion Assembly Page: 4 of 12
f:\standard ioms - current release\42004 instr. manuals\42004-308f.doc
05/11
Grounding Requirements
This unit must be grounded in accordance with the National Electrical Code (NEC) in the United States or
the Canadian Electrical Codes (CEC) in Canada. A #10 grounding stud has been provided at the base of
the stanchion for grounding. Connect the #10 grounding stud to a grounding electrode. A grounding
electrode rod is typically 8 feet (2.44 m) long per NEC 250, or 9.84 feet (3 m) long per CEC Rule 10.
Figure 3. Conduit/Surge Protection Locations