GAI-Tronics 400-001 RigCom Stations - Manual (Page 2)

Pub. 42004-376C
Model 400-001 and 400-002NS RigCom Stations Page 2 of 22
e:\standard ioms - current release\42004 instr. manuals\42004-376c.doc
04/14
The Model 400-001 and 400-002NS RigCom Stations are designed to be field replacements for the
previous MS39xx Series RigCom stations. As a field replacement for the MS39xx Series, the Model 400
Series must be configured as an unbalanced station.
Along with operation with the MS39xx Series RigCom stations, the Model 400 Series are designed to
operate with the EZ Page Series of GAI-Tronics equipment.
Important Safety Instructions
1. Read, follow, and retain instructions - All safety and operating instructions should be read and
followed before operating the unit. Retain instructions for future reference.
2. Heed warnings – adhere to all warnings on the unit and in the operating instructions.
3. Attachments - Attachments not recommended by the product manufacturer should not be used, as
they may cause hazards.
4. Servicing - Do not attempt to service this unit yourself. Opening or removing covers may expose you
to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.
5. This permanently connected apparatus must have an ALL-POLE MAINS switch with a contact
separation of at least 3 mm in each pole incorporated in the electrical installation of the building.
6.
WARNING
To reduce the risk of fire or electrical shock, do not expose this apparatus
to rain or moisture.