GAI-Tronics 400-001 RigCom Stations - Manual (Page 4)

Pub. 42004-376C
Model 400-001 and 400-002NS RigCom Stations Page 4 of 22
e:\standard ioms - current release\42004 instr. manuals\42004-376c.doc
04/14
Mounting
N OTE : The mounting surface must be able to support the weight of the aluminum enclosure. See the
Specification section for the weights and dimensions of the unit.
The enclosure must be securely fastened with 7/16 -inch diameter steel mounting bolts located on all four
mounting feet. Stainless steel hardware is recommended for applications in corrosive environments.
Refer to Figure 2 for mounting dimensions.
Figure 2. Model 400-001/400-002NS Mounting Details and Conduit Entries