Field wire connections to terminal block, Voip pcba connection in the model 13383 – GAI-Tronics 13382 WiFi and VoIP Addressable Amplified Speakers Manual User Manual
Page 20
Pub. 42004-462A
Model 13382 WiFi and 13383 VoIP Addressable Amplified Speakers
Page 18 of 24
f:\standard ioms - current release\42004 instr. manuals\42004-462a.doc
12/13
Field Wire Connections to Terminal Block
The Addressable Amplified Speaker provides terminal blocks inside the rear portion of the housing for
most field wiring. Each terminal block is labeled to indicate the functionality. Refer to Figure 7. When
connecting to TB101 it is recommended that spade or ring lug connectors are used.
Figure 7. TB101 Wiring Location
VoIP PCBA Connection in the Model 13383
Power the unit by either local power or PoE.
For local power, connect dc power to the terminal blocks on the back box (observing polarity) and
connect Ethernet port of VoIP PCBA to a 10/100 Base-T Ethernet Network. PoE would be applied via
the RJ45 connection.