Antenna connection – GAI-Tronics 10458-701 VoIP & VoIP WiFi Electronics Paging Modules User Manual
Page 25
Advertising
Pub. 42004-464B
Model 10458-701 and 10458-801 VoIP & VoIP WiFi Electronic Paging Modules
Page 23 of 24
f:\standard ioms - current release\42004 instr. manuals\42004-464b.doc
07/14
Antenna Connection
For WiFi installations, plug in the BNC connector on the antenna cable into the Paging Module.
Figure 8. Field Wiring Connections
Table 4. Recommended Cabling
Cable Use
Recommended Size
Conductor Range
LAN
Cat5 or Cat5e UTP cable with an RJ45 connector
Power
Two-conductor, No. 18 AWG is typical
No.28–12 AWG
Speaker
Two-conductor twisted pair, No. 18 AWG is typical
No. 30–12 AWG
Output contacts
Two or three-conductor, No. 18 AWG is typical
No. 28–20 AWG
Advertising
This manual is related to the following products: