GAI-Tronics XCP00600A Navigator Output Control Module Kit - Manual

Pub. 43003-034B
GAI-Tronics Corporation 400 E. Wyomissing Ave. Mohnton, PA 19540 USA
610-777-1374 „ 800-492-1212 „ Fax: 610-796-5954
V ISIT WWW . GAI - TRONICS . COM FOR PRODUCT LITERATURE AND MANUALS
G A I - T R O N I C S ® C O R P O R A T I O N
A H U B B E L L C O M P A N Y
Model XCP0600A
Navigator Output Control Module Kit
Field Installation Kit Instructions
Confidentiality Notice
This manual is provided solely as an operational, installation, and maintenance guide and contains
sensitive business and technical information that is confidential and proprietary to GAI-Tronics.
GAI-Tronics retains all intellectual property and other rights in or to the information contained herein,
and such information may only be used in connection with the operation of your GAI-Tronics product or
system. This manual may not be disclosed in any form, in whole or in part, directly or indirectly, to any
third party.
General Information
The Model XCP0600A Output Control Module Kit for the ICP9000 Series Navigator Console includes
the hardware and software necessary for plug and play installation, providing up to 32 output controls.
This kit is intended only for use in the ICP9000 Series Navigator Console and includes the following
components:
Qty Description
1 USB to DB9 converter, No. 69275-026
1 DB9 to Control Module Interface cable, No.61504-106
1 Navigator Software CD
1 Output Control Module, No. 12584-xxx
2 Mounting screws, No. 28096-001
ATTENTION
This manual supercedes Pub. 42004-359 packaged with the
Model 12584-xxx Output Control Module.
The Model 12584-xxx Output Control Module provides 32 digital outputs. The control module requires a
12 to 24 volt dc power supply. For communication and control by a Navigator MCU, the control module
is equipped with an RS-485 serial data interface.