Usb port – Genee World GV-9100 User Manual
Page 18
16
If it does not start automatically, after inserting the CD-ROM, Click [Start]
-> [My Computer], and double click
(the CD-ROM drive letter might
be different in different computer systems), and then the above screen will
appear immediately.
B. Click the
Install Capture Program button to install the program that
captures images in the AVI or
JPG
format.
C.
Click the
Install Code-Writing Program button to install Code-Writing
Program.
D. After the installation is finished, then click the
Exit button to exit the
Software Setup window.
E. Shut down your computer when prompted in order for the changes to take
effect.
F. Use the USB2.0 cable provided to connect your computer to the visualiser
before your computer is restarted.
USB PORT
The USB port can be used to store still images from the visualiser in a
computer. Connect the visualiser to your computer with the supplied USB
cable. The visualiser software is available on the supplied CD-ROM.
* Please pay attention to the following:
1. Computer hardware requirement: CPU: 2.4GHz, RAM: 256M or above,
Graphic card 64M, USB 2.0 port, Hard disk 40G or more, Monitor
display resolution higher than XGA (1024*768).
2. Operating system: Windows XP SP2 (Service Pack 2).
3. Must use a high-speed USB 2.0 cable provided
4. When connecting the visualiser to a desktop computer with the
high-speed USB 2.0 cable provided, we recommend using the USB
port located on the rear of the mainframe. The USB port on the front
of the computer might have interference.