Voicemail/message waiting indication, Call forward, Figure 60: retrieve voicemail – Grandstream GXV3275 User Guide User Manual
Page 87
Firmware Version 1.0.3.30
GXV3275 User Guide
Page 85 of 187
VOICEMAIL/MESSAGE WAITING INDICATION
When there is a new voicemail, the Message Waiting Indication (MWI) LED icon will blink in red on the
upper right corner of the GXV3275 and
will show up in the status bar.
To retrieve the voicemail:
1.
Tap on the Message icon
on the bottom of the idle screen to bring up voicemail screen. All the
registered accounts and the number of voicemails are displayed there.
2.
Tap on the account to dial into the voicemail box. Then follow the Interactive Voice Response (IVR) for
the message retrieval process.
Figure 60: Retrieve Voicemail
For each account, the Voicemail User ID can be set up under web GUI->Account X->General Settings:
"Voice Mail UserID". This is the number that will be dialed out to access voicemail message when tapping
on the account in Voice Mail screen.
CALL FORWARD
Call forward feature can be set up from GXV3275 LCD or web GUI.