Greenheck Fabra Hood, Single Section with Birdscreen, throat length less than or equal to 72 inches (471321) - Manual (Page 3)

Step 6
Step 7
3 Fabra Hood • Form B
Figure 5 Fabra hood B #471321
Figure 5
Install the END BIRDSCREEN ASSEMBLY. (See Figure 5)
Turn the BIRDSCREEN CLIPS (Which are pre-assembled
to the END BIRDSCREEN ASSEMBLY) so that two (2)
are under the SIDE BIRDSCREEN FRAME EXTENSION
and the other two (2) are under the HOOD SUPPORT
ANGLE, and tighten down. (See Figure 5, DETAIL "D")
Attach the HOOD RAIL ASSEMBLY to the HOOD
SUPPORT ANGLES, using two (2)
3 ⁄
8
x 3 ⁄
4
inch fasteners
per HOOD RAIL ASSEMBLY. (See Figure 6) NOTE:
Fasteners should be hand tightened only until step 8.
Figure 6 Fabra hood B #471321
Figure 6