Greenheck Grease Trap (476370) - Manual (Page 2)

Grease Trap Installation
on Hinge Frame
1. Back out both (2) 1 ⁄
4
-20 phillips
truss head screws.
2. Position grease box hooks over
the screws and retighten.
Parts List (per diagram)
Number Description Quantity
1 1/4-20 x 5/8 MS PTH (415729) 2
1
Grease box hook
2 476370 • Grease Trap, February 2013 Copyright 2013 © Greenheck Fan Corporation
As a result of our commitment to continuous improvement, Greenheck reserves the right to change specifications
without notice.
Specific Greenheck product warranties are located on greenheck.com within the product area tabs and in the
Library under Warranties.
Greenheck Centrifugal Upblast and Sidewall Exhaust catalog
provides additional information describing the equipment, fan
performance, available accessories, and specification data.
®
Phone: 715.359.6171 • Fax: 715.355.2399 • Parts: 800.355.5354 • E-mail: [email protected] • Website: www.greenheck.com
Our Commitment
AMCA Publication 410-96, Safety Practices for Users and
Installers of Industrial and Commercial Fans, provides
additional safety information. This publication can be obtained
from AMCA International, Inc. at www.amca.org.
476370 • Grease Trap, February 2013 Copyright 2013 © Greenheck Fan Corporation